Hi,

I'm wondering if anyone can point me into the right direction. I'm looking into a PID temperature controller to ramp down the temperature from a set value by 1 degree every 30 minutes.

I can't seem to find the right one for my application. I'll be hooking it up to my analog hot plate since the available ones such as the Torrey Pines seem to be a little excessive for my budget.

Thank you

 

Do you want to buy or make?

 

Do you want to buy or make?

I would prefer to buy something if it's already available otherwise I'll resort to arduino if need be.


I just assumed there would be a PID temp controller already available with a function like this.

 

What about one like this?

 

That could work really well. I'll have to look at the manual in depth to ensure its able to ramp down from say 130 degrees all the way down to 0 and then stop but only being capable of ramping down by 1 degree every 30 minutes so obviously I don't want to spend hours in the lab for controlled cooling.

I'll l have to make sure I have the right thermocoupler for this PID but looks good so far so thank you.