I haven't been able to figure out how to use the published specs on fuses so I am posting this opportunity for education.
For instance, an antique class A vacuum tube amplifier idles at 0.425 amps. The usual start surge is 1.3 amps and the meter occasionally reads as high as 1.95 amps. (Fluke 87V with a 250 usec peak current detect capability.)
0.6A slow works nicely and has been working for years. (I am not stuck with an inoperable amplifier.)
I would like some education about how to use published information to declare a proper fuse.
For instance, an antique class A vacuum tube amplifier idles at 0.425 amps. The usual start surge is 1.3 amps and the meter occasionally reads as high as 1.95 amps. (Fluke 87V with a 250 usec peak current detect capability.)
0.6A slow works nicely and has been working for years. (I am not stuck with an inoperable amplifier.)
I would like some education about how to use published information to declare a proper fuse.