Hi ,
Currently we are doing a project based on I.MX6 processor. We interfaced fujitsu thermal mechanism to processor via SPI.We wrote a software which is capable of printing all the languages. The mechanism is capable of 200mm/sec printing speed, we achieved upto 100mm/sec with average printing quality. How to achieve greater than 150mm/sec with good quality. The printer mechanism part number is FTP-63GMCL453 3inch printer. Our software is in Embedded Linux platform.
Currently we are doing a project based on I.MX6 processor. We interfaced fujitsu thermal mechanism to processor via SPI.We wrote a software which is capable of printing all the languages. The mechanism is capable of 200mm/sec printing speed, we achieved upto 100mm/sec with average printing quality. How to achieve greater than 150mm/sec with good quality. The printer mechanism part number is FTP-63GMCL453 3inch printer. Our software is in Embedded Linux platform.