FUJITSU THERMAL PRINTER INTERFACE

Discussion in 'Embedded Systems and Microcontrollers' started by akhilfrancis, Jan 19, 2017.

  1. akhilfrancis

    Thread Starter New Member

    Jan 19, 2017
    2
    0
    Hai,


    I am new to thermal printer. I am planing to interface fujitsu thermal printer with micro controller.
    In fujitsu data sheet i could not find anything more on code side.
    I dont know about the communication protocol between the printer and the micro controller.
    For serial reading should i .make any external circuit?
    please suggest me a reference design/sample code?



    Thanks Advance
    Akhil Francis
     
  2. RichardO

    Late Member

    May 4, 2013
    2,273
    895
    Which thermal printer are you trying to use. Do you have a data sheet?
     
  3. akhilfrancis

    Thread Starter New Member

    Jan 19, 2017
    2
    0
    FTP-628USL401 , this is the printer which i am going to use. i am planing to bring the interfacing board also.
    I have the data sheet. but i need to know some theory about the operation. I am going to communicate with serial interface.
    How the strobes and latch signal is working?
     
Loading...