flexible board interconnect pins

Thread Starter

Paul of Alexandria

Joined Jan 28, 2015
11
For an electronics project that will experience mechanical shock, I would like to interconnect two potted boards with a removable connector, e.g. pin and socket. I would need the pins to have a bend or crimp in them so that they could flex and not transmit the shock between the boards. Can anyone suggest a possibility? I could always use a straight board header and bend the pins myself, I suppose.
 

MaxHeadRoom

Joined Jul 18, 2013
25,623
But you mention " I would like to interconnect two potted boards with a removable connector, e.g. pin and socket. " ?
Not really clear as to what you are aiming for?
 
Top