Hello, As shown in the diagram bellow i need supply my DAC80004 with signals from my controller with synchronius USART.
port A pin3 is LDAC* Load DAC pin, active low
port A pin2 is sync* Serial interface synchronization, active low
port A pin 1 is CLR* clear dac pin
Port E pin10 SDin -serial interface digital input
PortE pin12 SCLK-serial interface shift clk
PortE pin11 SDO-serial interface digital out
Is there some manual i could use for the pin definition in this case?
Thanks.
port A pin3 is LDAC* Load DAC pin, active low
port A pin2 is sync* Serial interface synchronization, active low
port A pin 1 is CLR* clear dac pin
Port E pin10 SDin -serial interface digital input
PortE pin12 SCLK-serial interface shift clk
PortE pin11 SDO-serial interface digital out
Is there some manual i could use for the pin definition in this case?
Thanks.