i have BLDC motor from nidec extracted from panasonic printer but i don't know how to run it. the motor has 8 pins , what is the least number of pins to run it?. if any one helped i would be grateful. I have connected start/stop to 2.2 volt, Vcc =24 volt, and clck have frequency 16 khz then 2 khz but nothing happened and it didn't work.
the driver ic number is BD6762FV and the datasheet here http://rohmfs.rohm.com/en/products/databook/datasheet/ic/motor/brushless/bd6761fs-e.pdf
the driver ic number is BD6762FV and the datasheet here http://rohmfs.rohm.com/en/products/databook/datasheet/ic/motor/brushless/bd6761fs-e.pdf
Attachments
-
80.9 KB Views: 8