I need to design a common emitter voltage divider biased bjt transistor circuit. I know how to solve for different values when a few of the resistor values are already given, but in this case none of the resistor values are given and so I'm confused on how to do this. The requirements are that Icsat = 25mA and Vcc = 1.2V. Beta is not given, but can be between 50 and 200.
I tried solving for the resistor values, but the values I got were very low (like 10Ω for Re and 38Ω for Rc) and R1 and R2 were negative
Any guidance on how I should do this?
I tried solving for the resistor values, but the values I got were very low (like 10Ω for Re and 38Ω for Rc) and R1 and R2 were negative
Any guidance on how I should do this?