Hello,
Maybe is really simple for some but I've never made a circuit without a voltage regulator, I have always used an unregulated voltage regulator to supply to my ciruit 9V, 5V or 3,3V with its capacitor of IN and OUT, even if it wasnt needed I did use it for the stability and protection to the whole circuit.
Currently I am making a battery powered circuit (energy is supplied by two batteries AA in series) as far as all the components work in a range between 1.8V and 3.6V. As I said I dont have any experience making a circuit without a voltage regulator and I dont know if there are measures I could consider to make the circuit stable and secure without the voltage regulator. Note that all IC have decoupling capacitors and the circuit consumption would be around 30mA.
Thank you for reading,
Maybe is really simple for some but I've never made a circuit without a voltage regulator, I have always used an unregulated voltage regulator to supply to my ciruit 9V, 5V or 3,3V with its capacitor of IN and OUT, even if it wasnt needed I did use it for the stability and protection to the whole circuit.
Currently I am making a battery powered circuit (energy is supplied by two batteries AA in series) as far as all the components work in a range between 1.8V and 3.6V. As I said I dont have any experience making a circuit without a voltage regulator and I dont know if there are measures I could consider to make the circuit stable and secure without the voltage regulator. Note that all IC have decoupling capacitors and the circuit consumption would be around 30mA.
Thank you for reading,