Hi, looking for ideas to DIY soft start a DC motor @ 12 volt and 300amps draws about 1300 amp inrush. Any assistance appreciate.
Hi, looking for ideas to DIY soft start a DC motor @ 12 volt and 300amps draws about 1300 amp inrush. Any assistance appreciate.
It’s a engine starter motorIs this an Engine-Starter-Motor, or a Cable-Winch-Motor ?
.
.
.
Do You realize that it will only run for a maximum of aboutIt’s a engine starter motor
Gee you should have told the snow plow industry that and the winch makers back in the day. Both of them used starter motors to power the lift on the snow plow and the drum on the winches. The both use Ford starter motors with the only modification being the end of the shaft. The modification was a key way instead of a spline for the Bendix drive.Car Starters will not work as a Bicycle-Motor.
The are extremely inefficient.
They are designed to HIT an Engine hard for ~3 to ~5 Seconds, to get it started.
They're not good for anything else,
by Duane Benson
by Duane Benson
by Jake Hertz
by Aaron Carman