Hi guys, I hope you all well!
I have a problem with fritzing. I have a circuit like;

I need to design this circuit it fritzing (on breadboard). I tried something but I'am not sure things that I did. Since fritzing doesn't allow us to simulate, I am not sure about design. I would be glad if you could help.

Thank you in advance.

 

Offhand the breadboard looks okay.

But note that it's not good practice to connect a switch directly across a capacitor, as the high peak current when the switch closes and discharges the capacitor can burn the contacts.
To prevent this, put a small resistor (e.g. 10Ω) in series with the switch.

 

You can use a simulator via chrome or on your phone

https://everycircuit.com/app/

 

Offhand the breadboard looks okay.

But note that it's not good practice to connect a switch directly across a capacitor, as the high peak current when the switch closes and discharges the capacitor can burn the contacts.
To prevent this, put a small resistor (e.g. 10Ω) in series with the switch.

Thank you for your reply sir.

 

You can use a simulator via chrome or on your phone

https://everycircuit.com/app/

Thank you. I'll try.