Hello,

i need a clarification for use a relay above:

https://www.mouser.it/datasheet/2/307/en_g5le-1131193.pdf

i can't find a terminal + for the coil. Is this to mean the coil terminals + and GND are swappable between them?

Based on datasheet actually i've reserved terminal 2 for + and terminal 5 for GND.

I don't want to wrong the connection on the PCB drawed.

Thanks

 

Pins 2 and 5 are the coil, there is no polarity.

Keep in mind, 0V is not "ground", is just 0V. It could be grounded, but you should be careful to distinguish.

The negative terminal is not inherently ground.

 

Right clarification. It's the habitude . Thank you.