I have a project that needs a lot of 1S lipo batteries (3.7V). It is becoming very difficult to charge these lipo batteries. I was looking for a charger that can charge 5 to 10 lipo batteries together safely but couldn't find any. The lipo battery that I am using is ADHBT-401. Please let me know if there is anything available in the market that I can use or if I want to design a circuit and manufacture it from a vendor, what are the things that I need to know.

 

hi m,
Welcome to AAC.
This link is a multi LiPo charger tutorial.
https://oscarliang.com/parallel-charging-multiple-lipo/

E

 

Are the batteries in parallel?

Bob

 

I have seen the Microchip MCP73831/2 single cell Lipo charger (http://ww1.microchip.com/downloads/en/DeviceDoc/20001984g.pdf ) in various designs and plan to use it myself. At about $0.61 each, you could have one for each cell with individual on-charge and completed-charge indicator LED's (usually red and green, respectively). Sparkfun sells a breakout board with it ($$) and provides a free schematic showing how to set up the LED's.