For my Voltage Control Current Source (VCCS) I need a +/-120v for linear controlling.
But make sure you’re sitting down before you have a look at the price list!Hello,
Have a look at the APEX opamps:
https://www.apexanalog.com/products/matrix_high-voltage.html
https://www.apexanalog.com/products/matrix_high-current.html
You also might be interested in the attacked PDF.
Bertus
Thank you very much I'll try to implement thisYou can add circuitry to make more typical opamps do that:
View attachment 218955
I've seen a circuit where they adjust the power rails based on the output voltage so the opamp never sees a higher supply differential than specs allow.
These are lethal voltages. What is your application?
Thank YouHello,
Have a look at the APEX opamps:
https://www.apexanalog.com/products/matrix_high-voltage.html
https://www.apexanalog.com/products/matrix_high-current.html
You also might be interested in the attacked PDF.
Bertus
100mABut make sure you’re sitting down before you have a look at the price list!
a discrete transistor design would only cost a couple of quid.
How much output current is required?
I’ll give you some suggestions for parts/values if you want to use it.100mA
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
B | 120V Smart Dimmer to control zero cross SSR | Power Electronics | 2 | |
D | Latching Circuit to Stop 120V Power to Washing Machine | General Electronics Chat | 5 | |
T | converting 120v dc to 24v dc | Power Electronics | 10 | |
120v Relay for fan control wire | General Electronics Chat | 19 | ||
S | Can modify a 120V LED to run on 12V? | Power Electronics | 18 |