BLUENRG-M2SA Blink Program

Thread Starter

Ally Cat

Joined Mar 28, 2016
78
I am trying to use a BLUENRG-M2SA as my MCU. I am using an Stlink V to flash it. The program is written in C to flash a blue light. This does work when the programmer is connected to the MCU. When I disconnect it it stops.

Regards
 

Attachments

Thread Starter

Ally Cat

Joined Mar 28, 2016
78
Ok Part of the problem is the power on the STLink V was not connected. It now works with out debugger. I stall can't get the Atollic to change the program from the Keil install. I don't have the money for a Keil license.

Regards
 
Top