BLDC Motor Control System

Discussion in 'Power Electronics' started by Andreas Fischer, Jul 18, 2017.

  1. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
    picture85.png 1.png 2.png 3.png 4.png 5.png 6.png
     
    Last edited: Jul 18, 2017
  2. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
  3. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
    Program for the motion module
     
  4. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
    11.png
    Video
     
  5. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
    "Waijung" or "ไวจัง", a Thai slang for "so fast", is a Simulink Blockset that can be used to easily and automatically generate C code from your Matlab/Simulink simulation models for many kinds of microcontrollers (Targets). Currently, Waijung has been designed specifically to support STM32F4 family of microcontrollers (STM32F4 Target) which is a Hi-Performance & DSP MCU from ST microelectronics.

    In this thread, I talked about how I created the BLDC Motor control system.
    I await your questions and comments.
    Regards !

    Mod comment: commercial promotions are not allowed on this forum.
     
    Last edited by a moderator: Jul 19, 2017
  6. strantor

    AAC Fanatic!

    Oct 3, 2010
    4,986
    2,989
    Are you providing a working open source BLDC solution or asking for peer review or?
     
  7. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
    I provide an open source BLDC solution and request an expert evaluation and I want to show you the possibilities of Matlab.
     
    strantor likes this.
  8. P-Xel

    New Member

    Jul 19, 2017
    1
    0
    What board do you use as a motion module?
     
  9. Andreas Fischer

    Thread Starter New Member

    May 21, 2017
    7
    1
    For this task I recommend a board with stm32f407. This MCU is well mastered for "Waijung Blockset". For this task, the board must have four analog inputs and six discrete outputs. Parameters of different boards are studied on this thread http://support.aimagin.com/issues/2
     
  10. manu1234

    New Member

    Apr 19, 2018
    2
    0
    Hi andreas..
    I'm facing some difficulty in understanding your terminology.
    If you have any detailed report of your work or code please share
     
Loading...