I want to build a bitter plates magnet for 1 or 2 teslas. I looked at the web site of the University of Florida, the magnet laboratory are doing experiments with bitter plate up to 100 teslas. There are some drawings and texts, but don't tell you how to build a small scale, like 1 or 2 teslas. The pictures are not clear how the plates are put together, and how they are connected together to work like a coil. Are they a flat discs or spiral shaped discs that are connected in the ends? You can see both pictures in the web sites. Also, what is the purpose of the rods that goes through the plates. You can check the web sites for better understanding. www.hfml.run.nl/20t-magnet.html. also www.magnet.fsu.edu/education/tutorials/magnetacademy/magnets/fullarticle
I need your help with the specifications for a small scale size for 1 or 2 tesla bitter magnet: size of the discs, how many discs, insulation material, and be able to work with 12vDc.,how many amps?
I need your help with the specifications for a small scale size for 1 or 2 tesla bitter magnet: size of the discs, how many discs, insulation material, and be able to work with 12vDc.,how many amps?