i am going to make an rc helicopter in the shape of a bell 222 and add some strobe lights which will be a sequence of red leds along the nose of the helicopter(cylon eye or kitt scanner), this must be as simple and as light as posible with the component amount as low as possible. it must have around 20 leds. i was wondering if someone could draw me up a circuit diagram, i would want it to run off an input of 4.8v and 3.6v - 4.8v output to leds
i am also gonna be adding some leds that go strobing led 1 for a second, led 2 for half a second, led3 for half a second, one second delay(optional), led 1 for a second, etc. if you could draw a circuit for this, with the same led output voltage and input volts. have any questions please post.
i am also gonna be adding some leds that go strobing led 1 for a second, led 2 for half a second, led3 for half a second, one second delay(optional), led 1 for a second, etc. if you could draw a circuit for this, with the same led output voltage and input volts. have any questions please post.