Yes.Found out it works when the inductor has value around 10mh. That seems a bit high as all the circuits I checked had the inductor in the 100uH range. This circuit is high-voltage/low current. Can this be why a high-ish inductor is needed?





| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
| F | Basic Amp Circuit Question | Homework Help | 8 | |
|
|
Best First Projects for Learning Basic Electronics? | General Electronics Chat | 60 | |
| P | Basic 'clap ON' switch. | Sensor Design & Implementation | 16 | |
| C | basic questions about soldering. Beginner | Technical Repair | 47 | |
|
|
ESP32 Programming - A Helpful Suggestion & Annex32 Basic | Microcontrollers | 2 |