Hey, during our lab we had to solder a simple astable multivibrator, but the supervisor gave us such resistor values that nothing was visible on the oscilloscope. Therefore, I want to make a simulation of multivibrator circuit in PSPICE, but strangely, I have problems with floating nodes. I have NEVER had such problems with PSPICE and I have used it several times to simulate OP-AMPS circuits, etc.I have tried adding a resistor of high value to the ground node, but still the same problem. I have carefully attached all wires, ensuring there is no problem with doubled wiring and/or unconnected nodes.
I'm posting the screen as well as the .sch file...
Any help ?
I'm posting the screen as well as the .sch file...
Any help ?
Attachments
-
121.2 KB Views: 101
-
4.5 KB Views: 55