I’m a novice. I have a fixed 12V 30 amp regulated power supply. I don’t want to modify it internally, but would like to make a separate unit to attach to the output terminals to provide a variable 0 - 11 volt 5 amp supply with a digital volt/ammeter. I have the meter and probably all the needed transistors, etc. I would to maintain or even improve the regulation. Can anyone refer me to a good circuit schematic to accomplish this?
Larry Cruzen
<SNIP>
Moderators note : Removed email to avoid spam
Larry Cruzen
<SNIP>
Moderators note : Removed email to avoid spam
Last edited by a moderator: