hi, I am building a countdown unit for my paintball marker.It holds 99 balls
in the clip . i would like to use the 4511 cmos and 2 7 seg led common cathode. I need to know what chip would be needed for the countdown input
this is what I it to do
1. on power up w/ clip removed shows 00.
2. when clip is installed goes to 99
3 . when trigger pulled count goes down, marker can cycle as fast as 30 cyc pe sec.
4. for night games the display needs to be blanked out, the 4511 chip has that capability.
now for the fun part
I know you could build a unit w/ a pic controler with all the bells and wisles
and a lot less parts, i dont know the ist thing about about programming
if any knows who could write the program i would like it to do this
1. pwr up
2. clip removed shows00
3. cilp install shows 99
4. counts down 1 for ever input
5. when count gets to 10 flashes led
6. when clip removed led shows 00
7. have a provision for dimming
8. have a night mode, led stays off until you press a switch
if any one would like to help me w/ this programing
thanks alot mc
in the clip . i would like to use the 4511 cmos and 2 7 seg led common cathode. I need to know what chip would be needed for the countdown input
this is what I it to do
1. on power up w/ clip removed shows 00.
2. when clip is installed goes to 99
3 . when trigger pulled count goes down, marker can cycle as fast as 30 cyc pe sec.
4. for night games the display needs to be blanked out, the 4511 chip has that capability.
now for the fun part
I know you could build a unit w/ a pic controler with all the bells and wisles
and a lot less parts, i dont know the ist thing about about programming
if any knows who could write the program i would like it to do this
1. pwr up
2. clip removed shows00
3. cilp install shows 99
4. counts down 1 for ever input
5. when count gets to 10 flashes led
6. when clip removed led shows 00
7. have a provision for dimming
8. have a night mode, led stays off until you press a switch
if any one would like to help me w/ this programing
thanks alot mc