I need to wire up a panel with 10 separate 240V receptacles. These will be used for heaters in an industrial application. I also need to install blown fuse indicators in the box. My question is will I need to make 20 of them (one for each 240V line) or only 10 (one per pair)? MY thinking is I'll need 20 as if only one fuse pops the indicator will only light up on the popped one. But will this not matter since it's AC? Also what if both fuses pop?
We use terminal block fuse holders with indicators, just a simple 100k resistor with an LED. But that will only light if that fuse goes. If the other fuse goes will it still light? If both fuses blow will it still light? Thanks in advance.
We use terminal block fuse holders with indicators, just a simple 100k resistor with an LED. But that will only light if that fuse goes. If the other fuse goes will it still light? If both fuses blow will it still light? Thanks in advance.