Hey guys, I purchased an electric autoclave that was supposed to be 240v single phase but it showed up as 240v 3 phase instead. I contacted the seller and they basically told me I’m SOL, no returns. The unit consists of a 6kw heater element and control board to cycle heater on based on temperature input. I’ve read through the forums on converting the heater element to single phase and it seems simple enough, but the question I have is about the control board itself. The power comes into a contactor that has some small accessory wires which I’m assuming power the control board, I’m wondering if it will be possible to feed single phase power to it and maintain the functionality of the board. I’ll attach some pictures, thanks for the replies
Attachments
-
1.7 MB Views: 10
-
2.1 MB Views: 10
-
1.8 MB Views: 10
-
1.8 MB Views: 10