I am looking for alternative part/s for the following MFR part number:
CCM02-2504LFT T30 (C&K - acquired by Little fuse)
https://www.ckswitches.com/products/switches/product-details/SmartCard/CCM02%20MK2/
The above part is/has gone EOL.
I have considered parts by Amphenol and TE...
I have been fixing some bent keys on my Roland rd88, and is now trying to reconnect this ffc-cable and its connector after the cable seemingly just fell out of it :
There seems to be no latches on the connector, and the cable doesn't seem to wanna just slide in either.
Here's another picture...
Hello,
I am gonna be trying to identify a header connector, I know it's gonna be hard to find it!
I am just gonna put some images of it here if anybody came across it before, that would save me the trouble. :D
Thank you all,
My kids lost the power plug that goes from the wall outlet to the AC-DC transformer shown below for a video display. Can anyone tell me the name of this style of V-shaped female connector so I can order a replacement? I have searched a bit online and can't find this particular style.
Hi Guys
First post here
I have a basic project I could do with some help on please
The Job - 6 X holo ceramic garden cylinders (plant pots) with the top half having a wider diameter than the bottom half and holes in the bottom surface of the extended section. The owner would like me to...
what is the name of the connector that cuts the insulation on the wire, the one that is on many ethernet wall connectors?
you get a wire press it on top of the connector and 2 metal pieces cut the insulation on the wire.
Hi, can you identify the connection please? A 5V power supply goes into the PCB and the two prongs circled in red provide power, what type of connector is shown in white/biege? Should the biege bit come apart from the white bit and be on the two prongs (ie has it broke).
Thanks!
I am building a sprinkler controller, and I realized that the Dupont/PCB/breadboard female connectors I use for my microController are the perfect size for my doorbell wire (20ga). I have been using screw terminals for the sprinkler wires on my previous versions of my controller, but have had...
With a hobby build I have an issue and was wondering if anyone has any ideas?
Basically I have a 12v plasma tube light with two female spade connectors, the circuit board I am attaching it to has a two pin JST slot.
The circuit board has timed light and sound functions.
So was curious if...
Hi all,
I am currently reviewing this Degson DG2002-4.0 connector.
https://www.degson.com/content/details_123_10715.html
May I know what does the arrow above the connector mean?
And what do the holes beside the arrow does? Based on the photo below, there is this operating tool which can be...
Hello all,
I have a daughter board that resides about 1m far from main board, this daughter board contains buzzer and some ICs. I am already worried that I2C won't work properly over this long distance and now that I added PWM, I am afraid that will disturb I2C and lose connection between the 2...