Your Opinion of a Good, Cheap Digital Multimeter

MrSoftware

Joined Oct 29, 2013
2,280
There are several vidoes out there like the Dave Jones video linked earlier, those are very helpful. The only thing I can add is based on my experience, do not buy an Extech. I bought one of their clamp models to measure current, and it is absolutely horrible, it doesn't even zero so it must be out of calibration from the factory. My daily meter is a Fluke 87v and the more I use it the more I appreciate it. If you're just banging around the garage then the cheapies should be fine, but if you need to measure with any precision then spend the cash on a good meter. IMHO anyway.
 

Thread Starter

buffumjr

Joined Mar 24, 2018
52
All the tests I have run indicate this meter, albeit slow, is good. It is helpful to have digits. The Radio Shack analog multimeter was unpredictable in its readings. Sometimes, you'd get a consistent reading on 3 reads, sometimes, it would vary. This one is the same each time.

The cheapo Chinese case is in, and feels of good quality. The leads are on the "slow boat from China".

The longer I own this, and the more I use it, the happier I am with it. I'm seeing an average of $100 for a new price. $35 was a good deal.

I'm a home shop machinist. I shop at an industrial surplus house for raw materials and used cutting bits. I studiously avoid Chinese stuff, but find the Korean stuff to be of reasonable quality. Japanese, European, and American made are the best, and most expensive. This meter is Korean, and seems to be well made.

I'm guessing it was owned by a pro before I got it. It feels like he had it for awhile.

Pawn shops rock, if you are careful, and inspect what you are buying.
 
Last edited:

Thread Starter

buffumjr

Joined Mar 24, 2018
52
The LCR-T4 Mega328 Transistor Tester arrived today. "Slow boat from China". Assembled easily. No instructions. Does anyone out there have a URL for instructions for this? Google found one, but it was for a slightly different model, with test leads. Come to think of it, I wish this one had test leads.

My next door neighbor borrowed my UEI multimeter to diagnose problems with his brother's Yamaha outboard. By using the MAX voltage feature, he found it was the stator. Ugh. $600 for the part. Really happy with this multimeter. $35. SCORE!

I'm waiting for another "slow boat from China". New test leads. I bought the higher priced ones. They come with sharp points, and screw on alligator clips. The old leads are rather beat up.
 

eltomo

Joined Jun 30, 2018
3
Anyone have using experience of Amprobe AM-530 TRMS Electrical Contractor Multimeter? I am looking to buy a multimeter under 75 bucks. I don't want too cheap.
 

Wuerstchenhund

Joined Aug 31, 2017
189
The thing that attracts about Fluke is that the pros use them. Pros try to avoid things that break down. Break downs cost them time.
True, but pros use a wide range of brands, for example Keysight (former HP, then Agilent, now Keysight), or Gossen (a German brand). I wouldn't get fixated on a single brand. These days there are also very good DMMs from B-brands, which often act as OEM for the big brands.

Also, like Tektronix, Fluke also suffered from being in Danaher ownership, and some model had their fair share of problems.

As a Pro, we buy very little Fluke these days, most DMMs come from Keysight, and those that are used in harsh environments are Gossen Metrahits. If reliability matters, nothing comes close to Gossen, although you clearly pay through the nose for it.
 

rsjsouza

Joined Apr 21, 2014
430
As Wuerstchenhund mentioned, Fluke itself is not infallible, as there were some reported issues with leaking supercapacitors on models 189/289 (here) and the occasional dead-on-arrival unit. However, overall their quality is quite good and the track record is also very good - although this is being put in check due to a large number of models sold exclusively for the Chinese market (15B, 15B+, 17, 101) and more recent units have slight differences on their 87V model, which indicates manufacturing changes are taking place (details here).

Keysight has its problems as well (until recently they were sending a replacement unit to users of U127x models with severe RF shielding issues), but overall they are quite well manufactured.

Brymen is one of the manufacturers of high-quality products with re-branded units in several places around the world - in the United States, for example, several GreenLee and Extech DMMs are Brymen (here).
 
Last edited:

albert001

Joined Jan 1, 2019
7
I've used a Fluke 75 for over 10 years without any problems. iirc Paid around ~$60.00 - $75.00 for it.

Has basic features but is very reliable.

If you want a cheap multi-meter with more feature for around ~$20 to ~$40.00 you should considered many aren't well built and considered by many to be dangerous to use as they aren't well grounded or insulated. Often don't have a good enough design to protect the user when measuring high voltages. They often are poor construction using cheap probe connections without proper isolation circuitry.

It's difficult to determine the quality of a cheap multi-meter without first dismantling and inspecting construction and circuitry.

Cheap thin probe connectors is one indication that the dmm isn't really safe for measuring higher voltages and currents.

I recently purchased another used Fluke 79 III, cost was approx. ~$100.00 but there are better deals on used flukes in good working condition for around ~$50.00. Imo a used Fluke with common features is better than most cheap dmm's with more features.

To get more features such as being able to measure micro amps, etc. you need to go with a more expensive flukes such as a Fluke 87 or 87V. I'm not certain what cheap dmms would have feature such as measuring micro amps, but many aren't considered to be safe to use to measure higher voltages and currents.
 

albert001

Joined Jan 1, 2019
7
I have found less expensive "new" meters such as a Klein Tools MM200 for around $13.00

Not a bad meter.

have several others that I paid under $20.00 for.

Such as an old one (vintage?) with case and leads, never used Sears 82418.

Also a vintage difficult to find Snapit which I believe a Snap-On.
 

yellowfish

Joined Feb 9, 2009
44
Buy a Fluke. For transistor test buy a chinese "component tester" on Epay for around $7.00. It is uProcessor controlled automatic tester. It will test all semiconductors, capacitors, resistors and coils (inductance) and show it on a small screen. Just 9V battery power.
 

albert001

Joined Jan 1, 2019
7
New Fluke 101 can be found for around ~$50.00 (with free shipping)
New Fluke 106 I've seen for ~$50.00 (with free shipping)
New Fluke 107 are more, around ~$75.00+

Used Fluke 110's have sold for as little as $35.00 (with shipping) on eBay. Many Flukes I've looked on eBay have had little or light use, some still have the protection film, store returns, new open box, etc.

If wanting a new mutli-meter for around $50.00 I would go with a Fluke 100 series.

Comparison Fluke 100 series: http://testmeterpro.com/fluke-100-series-comparison/
 

Wolframore

Joined Jan 21, 2019
2,619
To replace my Fluke 113 - It's almost useless...
Which was given to me and was not bad until I replaced a bunch of 100k and higher resistors - thought they were bad :p




I will order more of these. They are now $19. This one is rock solid... did my own tests with it. Nice build with good shunt, diode dividers and ceramic fuses. It almost comparable to the protection circuitry in Fluke. The large fuse is smaller which is fine... fuses blowing is a safety feature.

Next one I order will have thermocouple.


 

nsaspook

Joined Aug 27, 2009
16,533
To replace my Fluke 113 - It's almost useless...
Which was given to me and was not bad until I replaced a bunch of 100k and higher resistors - thought they were bad :p




I will order more of these. They are now $19. This one is rock solid... did my own tests with it. Nice build with good shunt, diode dividers and ceramic fuses. It almost comparable to the protection circuitry in Fluke. The large fuse is smaller which is fine... fuses blowing is a safety feature.

Next one I order will have thermocouple.


https://reviewmeta.com/amazon-ca/B071JL6LLL
 
Top