Good morning everyone .

I have a Project that requires wireless communication between two arduinos. For that I chose to use the RF module. I have to write a program that when my temperature sensor detects a temperature that is higher than 70 ° C, sends the arduino # 2 a signal and it will turn me on a LED. I tried to write the code but it's hard for me to get by .. I really need your help. I thank you in advance !! those are the codes for receiver and transmiter i tried to write

 

hi Hajara,
Welcome to AAC.
The HC12 transmitter/receiver module works well with the Arduino.
It is a serial Tx/Rx settable Baud rates, range 1000mtrs line of site.
E

 

hi Hajara,
Welcome to AAC.
The HC12 transmitter/receiver module works well with the Arduino.
It is a serial Tx/Rx settable Baud rates, range 1000mtrs line of site.
E

Thank you
But I only have a few days left for the deadline so I think it's too late to change everything now right..

 

hi,
This is a link to an Ardunio Transmit/Receive project, using a simple RF signal.
It includes the diagram and Arduino code.
http://www.instructables.com/id/RF-315433-MHz-Transmitter-receiver-Module-and-Ardu/
E

 

t

hi,
This is a link to an Ardunio Transmit/Receive project, using a simple RF signal.
It includes the diagram and Arduino code.
http://www.instructables.com/id/RF-315433-MHz-Transmitter-receiver-Module-and-Ardu/
E

Thank you so much for the help I will check the link

 

hi,
If you need more help, tell us what type of radio, temperature sensor and Arduino you are using.?
E

 

hi,
If you need more help, tell us what type of radio, temperature sensor and Arduino you are using.?
E

I am not using it in real life i will just try to do a simulation on isis .. but as for isis i can't find a link to download a rf library as well