I'd like to make a 640*480 VGA to 8-bit RGB or LVDS converter using low pin count FPGA/CPLD. It has to be a QFP package. 8-bitRGB and LVDS need to be able to achieve both on the same chip.
The VGA input I want to build is similar to the schematic of the ML505/6/7 Vertex-5 evaluation board, but all I need is the bare minimum of functionality. I would prefer a model with fewer pins and easier availability over the long term.
Which device is recommended?
The VGA input I want to build is similar to the schematic of the ML505/6/7 Vertex-5 evaluation board, but all I need is the bare minimum of functionality. I would prefer a model with fewer pins and easier availability over the long term.
Which device is recommended?