I struggle with finding these in EasyEDA Library

 

Surely you can make a footprint for it.

 

Surely you can make a footprint for it.

Ofcourse, but I would like it smd presoldered, like the other components.

Is the second photo a JST connector (pitch 2 mm) ?

 

Your title says right angle but photo 2 is a "vertical male header", right angle is "horizontal", and these would generally be 2.54mm pitch,also known as "block pin headers". Which did you actually want?

Available in through-hole or SMD in pitches from 0.8mm - 5.08mm, but you are best advised to stick to 2.54mm for most purposes unless you have a specific need for a particular style/brand.

Unfortunately the easyEDA parts list has few options, so you'll need to create your own footprint, or use the LCSC parts list.

Here they are in LCSC parts list - wire-to-board, Plugin, P=2.54mm, 1x5P There are many options, best to check for mating parts.


and here the 2mm JST parts:

 

Thanks

 

It should all be SMD. Do you think the suggested 5-pin 2.54 header fits to this ?

 

That mates with a generic 1x5P pin header


Or its SMD equivalent:




Or it will mate with something like this, though they are not an official pairing

 

Thanks

 

For SMD, how about something like Samtec TSM-105-01-S-SH-P-TR?



This is with a pick-and-place plastic clip on it (you can order it without).

I've used these quite a bit on my projects.

ETA: Just realised you didn't mean right angle from your picture - but they do also make SMD perpendicular too. Just a sec...

Change the part to "-SV-" instead of "-SH-" - i.e. TSM-105-01-S-SV-P-TR.

 

Thanks. I will use this.
What about JST 2.00mm PH2.0 female header 4pin connectors to plug the board directly into the connectors marked with red rings.
Where do I find this for EasyEDA ?

 

Does this 4 pin ph2.0 mm. female connector exist as PCB connector (not wire) ?

 

Of course, assuming it is actually a JST PH connector and no some random Chinese 'JST-style'connector. JST part B4B-PH-K-S(LF)(SN) also available in horizontal THT and both vertical and horizontal SMD. Suggest you get an online JST catalog and learn to use it.


[Edit] seems that's not a PH at all, according to Google Lens it is a Molex 4 Way Female PicoBlade, and is a 1.25mm pitch. The matching socket is :
Molex part 53047-0410

also 53048-0410, THT horizontal, 53261-0471 SMD horizontal and 53398-0471 SMD Vertical