This is inside an Asus AC68U. Won’t power on. This components becomes extremely hot. I can only identity 100 450 P56. But no google results

 

I believe it is an inductor, probably 100uH. If it gets hot then this is likely to be because there is too much current through it and this is because of a fault somewhere else in the circuit.

 

I believe it is an inductor, probably 100uH. If it gets hot then this is likely to be because there is too much current through it and this is because of a fault somewhere else in the circuit.

Thank you Albert. I did find a tear down vid on YouTube and the presenter mentioned it as a inductor but I wanted to make sure. Appreciate the quick response.