What are we checking? The soldering on the brown and green wires?looking for someone who can double check
In theory, the solder is to provide an electrical connection, not a mechanical connection.if I lessen up on the solder is it gonna stay connected
I'd remove the wire, put flux on the pad and wire, and resolder trying to get a better joint. Instead of having the stranded wire almost perpendicular to the pad, I'd lay it on its side to insure good contact.there is no other lead connected than the trace that broke with the pcb piece that is was on
None that I'd recommend. I find most of them tedious.Will do . .. do you guys know any good sources for beginner tutorials and simplified explanations of all the terminology ..and working behind the electronics ..
Or many a recommended YouTube channel or book that's a must have