I have a tablet ( broken screen) and a 22" monitor laying around doing nothing. Can these two get married?
My thinking is to take the ribbon of the tablet that connects to the screen (see attachment) and modify it to get an rgb signal to drive the monitor.
Any help/direction would be appreciated.

 

I guess it could but resolution would be limited accordingly to the phones specs.

 

1280 x 800 would be enough for what I need. MP3 workstation, little YouTube.
Where could I find the wiring of the ribbon?

 

You would have to find the name of driver IC to get the wiring.

 

Does this photo of the ribbon says something or where do I have to look for the name of the IC

 

What is the name of the tablet?

 

LG V480

 

Cant find anything about display.

 

Yes I'm also not lucky. Is there any standards followed? The screen is a standard 8" tablet screen so from that side of the ribbon it should be a standard wiring. Or maybe I'm mistaken

 

Read the name of the chip that is on the flex cable.

 

EAX66067501_1.0_V480_F_LOWER
and under this
BH1427-19

 

Not that, there is a chip on first image you posted in your original post.