I watch on FB comparing that Musican/Dancer/Singer are getting more popular and getting money than engineers.
Why?

 

Most people want to be entertained. They find it a lot more fun to watch a dancer perform than an electric engineer calculate op amp feedback or 3rd degree equations.

 

Electric engineer calculate op amp feedback or 3rd degree equations.

Hmm me to

 

I watch on FB comparing that Musican/Dancer/Singer are getting more popular and getting money than engineers.
Why?

Re: the lucrative nature of 'Show Business' and its ilk:
Work that is published/produced means a lot of people paying a little --- It adds up!
Also, each 'job' (i.e. Movie, Album, Book, etc...) need only be 'done' once... So 'raw material' costs, as it were, are negligible...

Best regards
HP

 

Are you thinking of studying to become a pilot, Rritesh? 'Darwin ' and 'Awards' come to mind .

 

and asked for Production Display to calculate the length of Wire Being Manufactured from PLC they said it has good business in Future and Now.
But i have no idea how to build it.

Wiring Harness manuf. companies are using this technology for years?
Max.

 

A cable harness, also known as a wire harness, cable assembly, wiring assembly or wiring loom, is an assembly of cables or wires which transmit signals or electrical power.

 

This thread is about airplanes. @RRITESH KAKKAR , keep it focused or I will close it.

 

OK.

 

Are you thinking of studying to become a pilot, Rritesh? 'Darwin ' and 'Awards' come to mind .

TOS violation comes to mind. Quit sniping.

 

I have seen and have one BLDC with ESC.
I want to know the Airplane how the propeller RPM or how fast it rotates it has lot of air which give it fly.
THE BLDC i was testing was flying at few amperes very fast, if i compare it with plane how fast it will be?

 

This thread is about airplanes. @RRITESH KAKKAR , keep it focused or I will close it.

I must admit to some confusion -- When the restriction on discussion of highway and water vehicles was lifted, it was clearly stipulated that aircraft remained 'off limits' -- If this has changed may we please combine said discussion with the automotive forum (or whatever) --- I'd hate to see AAC degenerate to the level of a 'machine enthusiast' site!

With genuine respect
HP

PS --- Please don't get me wrong! - I'm a 'machine enthusiast'/owner myself (Apart from highway vehicles -- I enjoy 'playing with' my experimental rotary-wing aircraft and speed boats) --- So no need to 'flag' me as a 'bluestocking'! -- That said, I regard the maintence of (some semblance of) an intellectual tone on these fora a 'worthy cause'

 

He had a general question about airplanes, not how to build one. I consider that harmless as long as it stays at that level.

 

He had a general question about airplanes, not how to build one. I consider that harmless as long as it stays at that level.

Fair enough!

 

I have seen and have one BLDC with ESC.
I want to know the Airplane how the propeller RPM or how fast it rotates it has lot of air which give it fly.
THE BLDC i was testing was flying at few amperes very fast, if i compare it with plane how fast it will be?

Wings generate lift,propeller provides the pulling power.

 

RRITESH KAKKAR, you'd be better off asking questions after reading this, to start with.

http://science.howstuffworks.com/transport/flight/modern/airplanes.htm