yes my task is to generate clock pulse from second loop and generate a random digital signal(10011100111111 like thisl,,,finally send this clock and data through a serial in parallel out shift register and shift that data on seven segment parallel,,, I tried with ne555 cloc it is difficult to keep the clock in steady frequency,,,,
- Please identify what you want to do and why.
- two loops creating pulses?
- pulses in phase if so please identify accuracy and max jitter allowed.(nS/uS/mS)
- processor used clock speed.
- I like to help you but need more information
- Picbuster
The short answer is no, not like that, but you can do it like this:
Set up a timer to generate an interrupt, perhaps every 200mS. Then on every 3 interrupts toggle port d, and every 10 interrupts toggle port a. This also leaves the uC with lots of free time to do something else.
Sure. Count time from last action and once that exceeds your desired duration, go into action.is there any method of running these two programmes parallely???? h
by Aaron Carman
by Jake Hertz
by Jake Hertz
by Jeff Child