First time user trying to determine how to test the ENP021C0700SED1 circuit board on an Eaglerise light fixture.
The problem is that the lights on the fixture (three lights with multiple leds each) does not work. Referring to the attached photos, I've tested by connecting 120v AC to the black and white input wires, and determining that there is no output voltage across the red and black wires.
That's as far as my knowledge goes; but, I'd like to figure out what the problem is and fix it just for my personal satisfaction. Over the years I've been stumped by other similar electronic problems with appliances and cars, and I'd like to learn more about electronic circuit troubleshooting.
What would you do next to test this board?
Thank you.
The problem is that the lights on the fixture (three lights with multiple leds each) does not work. Referring to the attached photos, I've tested by connecting 120v AC to the black and white input wires, and determining that there is no output voltage across the red and black wires.
That's as far as my knowledge goes; but, I'd like to figure out what the problem is and fix it just for my personal satisfaction. Over the years I've been stumped by other similar electronic problems with appliances and cars, and I'd like to learn more about electronic circuit troubleshooting.
What would you do next to test this board?
Thank you.
Attachments
-
136.5 KB Views: 19
-
160.4 KB Views: 18
-
147.8 KB Views: 17
-
200.5 KB Views: 18
-
144.5 KB Views: 17