To whomever is willing to help me thank you very much I am a newbie and just cannot for the life of me figure this out .
I have an Arduino project that I connect 5 buttons to 1 analon read out A0 and use the voltage difference from the different resistor value to determine which button is pushed in my program . Now on the breadboard no problems moved it to PCB and I get a steady 4.55 volts. Now I did notice that first button on the left of my bread board is also 4.55 volts when pressed. I will provide pictures and please be easy on my solder work I am very new at this
I have an Arduino project that I connect 5 buttons to 1 analon read out A0 and use the voltage difference from the different resistor value to determine which button is pushed in my program . Now on the breadboard no problems moved it to PCB and I get a steady 4.55 volts. Now I did notice that first button on the left of my bread board is also 4.55 volts when pressed. I will provide pictures and please be easy on my solder work I am very new at this
Attachments
-
1.1 MB Views: 11
-
1,002 KB Views: 11
-
1.1 MB Views: 11