Does anyone have any tips or ideas on how I can trace a cable from one point? I have a courtesy lighting circuit in the front doors. And I want to tap into the power source. So instead of running a wore from the door and through the tight grommet of the door hinge, I would prefer to tap in to the cables outside of the door where it's coming from anyway. But there are soo many wires and I don't know where to even begin. Ideally I don't want to pierce the cable sleeve or anything.
I got myself one of those toning devices where I plugged in the wire but the minute I plug the crocodile clip of the toner into the wire then the toner almost stops toning at the crocodile clip end so that doesn't seem like an option
I got myself one of those toning devices where I plugged in the wire but the minute I plug the crocodile clip of the toner into the wire then the toner almost stops toning at the crocodile clip end so that doesn't seem like an option