I made a all N channel Mosfet H Bridge, as picture attached, few questions:
1. the H Bridge can be driven by the voltage of 6 - 24 V, not like said need a voltage of higher than output V, that is 24 V here?
2. The gate voltage can't go to 0 V when the switch is off?
3. Can I use this Bridge to drive a 400W motor manually or need few Mosfet in parallel?
Thanks
sorry about the picture does not show, I posted at https://imgur.com/gallery/XFwHX0z and I don't know why?
1. the H Bridge can be driven by the voltage of 6 - 24 V, not like said need a voltage of higher than output V, that is 24 V here?
2. The gate voltage can't go to 0 V when the switch is off?
3. Can I use this Bridge to drive a 400W motor manually or need few Mosfet in parallel?
Thanks
sorry about the picture does not show, I posted at https://imgur.com/gallery/XFwHX0z and I don't know why?
Attachments
-
61.3 KB Views: 34