Switching High-Current DC using 4 Mosfets for +/- (Induction Heater Load)

Discussion in 'Power Electronics' started by Luna Tuna, Jan 20, 2019.

  1. Luna Tuna

    Thread Starter New Member

    Jan 17, 2019
    17
    0
    Attached is the schematic.

    I want to use RaspberryPi 5V pwm lines to switch back-and-forth the current through an induction heater coil. It's almost working except the magnitudes on the output currents are way small. I expected them to be +/-5A.
     
  2. Luna Tuna

    Thread Starter New Member

    Jan 17, 2019
    17
    0
    I solved this a long time ago
     
Loading...