Supply 5V DC with USB Port

Thread Starter

luckycyq1010

Joined Feb 16, 2016
2
Hi,

I am trying to supply 5V DC to a circuit that has a couple of ICs with a USB Port.

Are these all I need?

USB to 3.5mm barrel cable
3.5mm barrel power jack
a decouple capacitor

If someone can also recommend some parts, it would be appreciated.
 

MaxHeadRoom

Joined Jul 18, 2013
28,619
You can get a USB cable that most likely will come with a Mini USB on the other end, you can replace this with the barrel jack.
You don't show your Country of origin but Digikey have the parts.
Max.
 

wayneh

Joined Sep 9, 2010
17,496
Pay attention also to the dimensions of the jack's male and female parts. The diameter of the center hole is also important, and even the length of the barrel. Details matter.
 

MaxHeadRoom

Joined Jul 18, 2013
28,619
You can pick up a USB cord locally or off ebay, the barrel jack and plug are stocked by Digikey, just search Barrel Jack.
Naturally only the +5v and common conductors are used on the cord.
Max.
 
Top