Does anyone have a wiring diagram for a "USB 3.0 Type A to Micro-B Cable"? I need to build a cable of custom length (short), and have the components to do so. However, I can't seem to find a schematic that isn't in Japanese to go by. And an additional question: The Micro-B side of the cable has a pin for On-The-Go ID. Since there isn't a corresponding pin on the USB 3.0 Type-A side... what do I do with it? Let it hang, connect to ground? Please and thank you!!!!!
VR/NS

 

hi NS,
Is this any help.?
E
http://pinoutguide.com/PortableDevices/micro_usb_3_connector_pinout.shtml

 

hi NS,
Is this any help.?
E
http://pinoutguide.com/PortableDevices/micro_usb_3_connector_pinout.shtml

Eric, thanks much. It does help, and I see there is a pinout for the corresponding USB 3.0 Type-A end. What I need is the wiring schematic between the two ends, which wires go to which pins and which don't. I found this diagram, and am asking for a sanity check by the big brains here on the forum... It seems correct to me, for what I know anout it. But the OTG wire on the Micro-B connector has no corresponding connection on the Type-A side. What does one do with that pin, ground it, leaving it floating?

 

hi NS,
I have found this link.
http://www.firstpost.com/tech/news-...-cable-for-an-android-smartphone-3602355.html

EDIT:
https://www.premiumusb.com/blog/what-is-usb-otg-on-the-go-how-to-make-your-own-otg-usb-cable
E