Facebook
Google
GitHub
Linkedin
i have the following code working on a 16f84a.
my problem is that i need to have a time variable to tell me how long the switch has been pressed for and to store the value. im using microcode studio plus.
ive looked through the studio plus manual and the help in studio plus and it just doesnt make sense to me.
if i could get some direction in this i would be forever in your debt as ive very little time left on this.
the open label at the end is for a barrier which ive yet to write code for.
im not sure what else i need to put up here as my last post didnt attract any helpers so please tell me if more info is required.
Add-on---ive had no feedback from this so im going to try somewhere else but thanks for those that looked.
symbol CAR=PORTB.1
SYMBOL TRUCK=PORTB.2
SYMBOL CAPACITY = 5
SYMBOL CAPACITY2 = 5
I var byte
temp var byte
CNTCAR var word
CNTTRUCK VAR WORD
TRISB=3
CNTCAR=0
CNTTRUCK=0
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "project" ' Display Hello
Pause 5000 ' Wait 5 second
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "yes"
Pause 5000 ' Wait 5 second
LOOP:
TEMP=0
BUTTON TRUCK,1,255,0,TEMP,0,LCD
TEMP=0
BUTTON CAR,1,255,0,TEMP,0,LCD1
GOTO LOOP
end
LCD:
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "TRUCK ENTERING"
Pause 5000 ' Wait 5 second
Lcdout $fe, 1 ' Clear LCD screen
LCD1:
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "CAR ENTERING"
Pause 5000 ' Wait 5 second
Lcdout $fe, 1 ' Clear LCD screen
OPEN:
GOTO loop
my problem is that i need to have a time variable to tell me how long the switch has been pressed for and to store the value. im using microcode studio plus.
ive looked through the studio plus manual and the help in studio plus and it just doesnt make sense to me.
if i could get some direction in this i would be forever in your debt as ive very little time left on this.
the open label at the end is for a barrier which ive yet to write code for.
im not sure what else i need to put up here as my last post didnt attract any helpers so please tell me if more info is required.
Add-on---ive had no feedback from this so im going to try somewhere else but thanks for those that looked.
symbol CAR=PORTB.1
SYMBOL TRUCK=PORTB.2
SYMBOL CAPACITY = 5
SYMBOL CAPACITY2 = 5
I var byte
temp var byte
CNTCAR var word
CNTTRUCK VAR WORD
TRISB=3
CNTCAR=0
CNTTRUCK=0
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "project" ' Display Hello
Pause 5000 ' Wait 5 second
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "yes"
Pause 5000 ' Wait 5 second
LOOP:
TEMP=0
BUTTON TRUCK,1,255,0,TEMP,0,LCD
TEMP=0
BUTTON CAR,1,255,0,TEMP,0,LCD1
GOTO LOOP
end
LCD:
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "TRUCK ENTERING"
Pause 5000 ' Wait 5 second
Lcdout $fe, 1 ' Clear LCD screen
LCD1:
Lcdout $fe, 1 ' Clear LCD screen
Lcdout "CAR ENTERING"
Pause 5000 ' Wait 5 second
Lcdout $fe, 1 ' Clear LCD screen
OPEN:
GOTO loop
Last edited:
