hello >>>>>>>
i don't have an experience with microcontrollers and sensors and lcd's
i'm new in electronics.... so i want to make electronic circuit that measure the distance away from an object using srf08 ultrasonic sensor and pic16f877 and display the result on a (((lcd parallel display)))
i found this code in mikrobasic here it is
http://www.robot-electronics.co.uk/files/srf08PicBasic.pbp
and this is the schematic
http://www.robot-electronics.co.uk/htm/picbasicpro_examples.htm#SRF08 Ultrasonic Ranger
i connected the circuit and burn the hex file of this code to the pic16f877
but i cant display the distance because i don't have (serial lcd)
i have ((parallel))
please help me how to connect the parallel lcd to the pic
knowing that i have (L2012 SII LCD)
and help me if i must edit this CODE>>>
i don't have an experience with microcontrollers and sensors and lcd's
i'm new in electronics.... so i want to make electronic circuit that measure the distance away from an object using srf08 ultrasonic sensor and pic16f877 and display the result on a (((lcd parallel display)))
i found this code in mikrobasic here it is
http://www.robot-electronics.co.uk/files/srf08PicBasic.pbp
and this is the schematic
http://www.robot-electronics.co.uk/htm/picbasicpro_examples.htm#SRF08 Ultrasonic Ranger
i connected the circuit and burn the hex file of this code to the pic16f877
but i cant display the distance because i don't have (serial lcd)
i have ((parallel))
please help me how to connect the parallel lcd to the pic
knowing that i have (L2012 SII LCD)
and help me if i must edit this CODE>>>