please anyone can solve it.
using LTspice
Task#3: Create a schematic of the SRAM Sense amplifier > Pre_charge the Bit and
Bit_Bar to VDD > Now apply a voltage difference of 0.5 V on two bit lines and sense
it using word_Line and Sense_En inputs. The outputs Data and Data_Bar should
establish a perfect logic 0 and logic 1. Simulate and record the resulting plots.

 

Welcome to AAC!

please anyone can solve it.

Homework Help doesn't work that way. You need to show us your best effort, then members are allowed to provide guidance.

 

yes but i need some hints related to this question which shared i tried many times but not clarify this question sir.

 

This is my output of 6T_SRAM circuit and output but i need some help . how i use
Word_Line and write driver transistors flip the data stored at node Q
and Q_bar ?
Any suggestions realted to it to slove it.