Hello all! Here is my situation and question:
I have a razer Orbweaver (it is a user interface, additional keyboard of sorts. see the link if you need more details) It connects to the PC via a USB connection. I am adding an analog thumbstick project to the factory device (I have already completed a couple and this is not the part I have questions about) The addon project connects to a Teensy 4.0 board which is connected to the PC via a Micro USB(from the Teensy) to USB 3(to the PC). My question is: Can I just solder a splice into the existing USB connection within the device and into the Teensy? Basically handling all of the wiring internally and just using the existing USB cord already attached to the device for the whole thing? I'm not familiar enough with USB to know if this would be bad or not.
https://www2.razer.com/au-en/gaming-keyboards-keypads/razer-orbweaver-chroma
Thanks
I have a razer Orbweaver (it is a user interface, additional keyboard of sorts. see the link if you need more details) It connects to the PC via a USB connection. I am adding an analog thumbstick project to the factory device (I have already completed a couple and this is not the part I have questions about) The addon project connects to a Teensy 4.0 board which is connected to the PC via a Micro USB(from the Teensy) to USB 3(to the PC). My question is: Can I just solder a splice into the existing USB connection within the device and into the Teensy? Basically handling all of the wiring internally and just using the existing USB cord already attached to the device for the whole thing? I'm not familiar enough with USB to know if this would be bad or not.
https://www2.razer.com/au-en/gaming-keyboards-keypads/razer-orbweaver-chroma
Thanks