Hi,
I have a questions regarding the connection to device (DAC) with the SPI protocol.
Often, I have to write to the device 2 times to get the correct Vout voltage of the DAC.
I use the following code: (Read the comments to know more about my question)
The SSPCON1 is as follow :
The device is a TI D A C 7 6 1 5.
Thank your for your help, I'm desesperated. lol
I have a questions regarding the connection to device (DAC) with the SPI protocol.
Often, I have to write to the device 2 times to get the correct Vout voltage of the DAC.
I use the following code: (Read the comments to know more about my question)
The SSPCON1 is as follow :
Rich (BB code):
SSPCON1 = 0x02;
SSPCON1bits.CKP = 1;
SSPSTATbits.SMP = 0;
SSPSTATbits.CKE = 0;
SSPSTATbits.SSPEN = 0;Thank your for your help, I'm desesperated. lol
