i am a first year student in electrical and computer engineering and my project is to design and build a single stage voltage divider amplifier with the following design specs:
1. voltage gain = 50
2. lower cut off frequency must be less than 100Hz
3. it must have maximum symmetrical swing
4. supply voltage = 15V
5. small signal transistor (2N3904/2N2222) is to be used
and i cannot get my values of Icq, etc by using the rule-of-thumbs
1. voltage gain = 50
2. lower cut off frequency must be less than 100Hz
3. it must have maximum symmetrical swing
4. supply voltage = 15V
5. small signal transistor (2N3904/2N2222) is to be used
and i cannot get my values of Icq, etc by using the rule-of-thumbs
Last edited: