I am not too familiar with fuses, and have never used one before, but I need to properly fuse a DC motor.
Some info on the motor:
http://www.bodine-electric.com/Asp/...5L+Series+DC+Right+Angle+Gearmotor&Model=4119
A control box is also used to control the speed of the motor, and I'd say it's running at 80% of the full speed.
From what I understand I think a 10Amp fuse is what I need, but I'm not sure if my calculations are correct. Any advice on the specs of the most appropriate fuse would be greatly appreciated.
Some info on the motor:
http://www.bodine-electric.com/Asp/...5L+Series+DC+Right+Angle+Gearmotor&Model=4119
A control box is also used to control the speed of the motor, and I'd say it's running at 80% of the full speed.
From what I understand I think a 10Amp fuse is what I need, but I'm not sure if my calculations are correct. Any advice on the specs of the most appropriate fuse would be greatly appreciated.