Samsung handset hardware understanding.

Status
Not open for further replies.

Thread Starter

robo29

Joined Nov 24, 2016
66
Hello,
Few year i plan to buy touchscreen mobile it was samsung gt 5360
i open it after it was not working and dead i used it as my study purpose i found touch screen camera chip etc etc
i want to know its part number like which touchscreen was it can we connect with pic micro controller etc??
 

absf

Joined Dec 29, 2010
1,968
You can get touch screen ready made for Arduino and RPi cheaply from eBay here and here.

But if you want to spin your own from some touch screen (without any datasheet) and interface them to PIC. That would take considerable efforts, time and know-how to do it successfully.

Allen
 

absf

Joined Dec 29, 2010
1,968
Or you can ask those technicians who repair handphones. Here where I live there are at least 30 to 40 brands from various countries and each brand has so many models. One of the Nokia phones I bought was made in India.

I dont know whether the techs repair by changing components on the main board or just change the whole board. Where do they get all those service manuals of all different brands are beyond me. Unless you are an Authorised Repair Centre for Samsung, I doubt you can get the Samsung S.M. for free(without paying a handsome sum) on the internet.

Allen
 
Last edited:

absf

Joined Dec 29, 2010
1,968
Here is the picture of the main PCB of a 30-year-old Nokia 3310.... "non-smart phone";)

Nokia 3310 a2.jpg
Can you find something like this for your Samsung smart phone?

Allen
 
Status
Not open for further replies.
Top