I had a Stanley Fatmax 700 Jumper box, not the exact box linked bellow but basically the same thing minus a couple of USB ports.
https://www.homedepot.com/p/Stanley...PIPHorizontal2_rr-_-202188376-_-306184808-_-N
So I went to jump my car and nothing taped the leads no sparks. At the time i was curious wtf was wrong and set the thing aside for a charge no luck still after two days. Compressor worked threw all of this but not the leads. So ok i set it aside on the work bench and wait for some time to crack it open. Pop it I know I am not going to fix it beyond throwing a new batter in it this is still beyond me. Throw a tester reads 12v rated 12v ok not the battery decide I will just break it down and salvage the compressor and battery.
Kept the PCB just so i could decode how the compressor was connected latter. Here is what i ran into. I hooked the compressor up multiple times to my PSU. I have barley gotten it to move make more than a chirp. When the switch is flipped the light on my PSU will turn off, if the rating on the switch is right its 120v meaning maybe i need capacitor or booster circuit of some kind. The other thing that I think might help is a soft start circuit. Obviously I am noob with this stuff just trying to learn. Hope I can get some help here.
https://www.homedepot.com/p/Stanley...PIPHorizontal2_rr-_-202188376-_-306184808-_-N
So I went to jump my car and nothing taped the leads no sparks. At the time i was curious wtf was wrong and set the thing aside for a charge no luck still after two days. Compressor worked threw all of this but not the leads. So ok i set it aside on the work bench and wait for some time to crack it open. Pop it I know I am not going to fix it beyond throwing a new batter in it this is still beyond me. Throw a tester reads 12v rated 12v ok not the battery decide I will just break it down and salvage the compressor and battery.
Kept the PCB just so i could decode how the compressor was connected latter. Here is what i ran into. I hooked the compressor up multiple times to my PSU. I have barley gotten it to move make more than a chirp. When the switch is flipped the light on my PSU will turn off, if the rating on the switch is right its 120v meaning maybe i need capacitor or booster circuit of some kind. The other thing that I think might help is a soft start circuit. Obviously I am noob with this stuff just trying to learn. Hope I can get some help here.
Attachments
-
180.6 KB Views: 13
-
188.5 KB Views: 13
-
186.8 KB Views: 104
-
150.9 KB Views: 12